Al2O3/TiCN-0.2% Y2O3 Composite Prepared by HP and Its Cutting Performance

Li Xikun; Qiu Guanming; Qiu Tai; Zhao Haitao; Bai Hua; Sun Xudong

doi:10.1016/S1002-0721(07)60519-5

Al₂O₃/TiCN-0.2% Y₂O₃ Composite Prepared by HP and Its Cutting Performance

Li Xikun, Qiu Guanming, Qiu Tai, Zhao Haitao, Bai Hua, Sun Xudong

Research output: Contribution to journal › Article › peer-review

14 Scopus citations

Abstract

Al₂O₃/TiCN-0.2% Y₂O₃ composites were fabricated by hot pressing sintering. The effect on mechanical property and microstructure of the sample composition and HP temperate was investigated. The results of Al₂O₃/TiCN-0.2% Y₂O₃ were satisfied. The bending strength, fracture toughness, Vickers hardness was respectively 1015 MPa, 6.89 MPa·m^1/2 20.82 MPa at 1650 °C for 20 min. Good wear resistance was found for the kind of ceramic material when used as cutting tools in the machining of the hardened carbon steel. By the compared experiment for the cutting performances, it could be seen that the performance of this composite material was better than that of the ceramic tool material YT15 for continuously cutting quenched steel. This kind of composite tool material is suitable for continuously cutting quenched steel No.45, especially intermittently cutting quenched steel.

Original language	English
Pages (from-to)	37-41
Number of pages	5
Journal	Journal of Rare Earths
Volume	25
Issue number	SUPPL. 1
DOIs	https://doi.org/10.1016/S1002-0721(07)60519-5
State	Published - Jun 2007
Externally published	Yes

Keywords

AlO/TiCN
YO
composite
mechanical properties
rare earths

Access to Document

10.1016/S1002-0721(07)60519-5

Cite this

@article{90959b381fd64e458b30085e96765752,

title = "Al2O3/TiCN-0.2% Y2O3 Composite Prepared by HP and Its Cutting Performance",

abstract = "Al2O3/TiCN-0.2% Y2O3 composites were fabricated by hot pressing sintering. The effect on mechanical property and microstructure of the sample composition and HP temperate was investigated. The results of Al2O3/TiCN-0.2% Y2O3 were satisfied. The bending strength, fracture toughness, Vickers hardness was respectively 1015 MPa, 6.89 MPa·m1/2 20.82 MPa at 1650 °C for 20 min. Good wear resistance was found for the kind of ceramic material when used as cutting tools in the machining of the hardened carbon steel. By the compared experiment for the cutting performances, it could be seen that the performance of this composite material was better than that of the ceramic tool material YT15 for continuously cutting quenched steel. This kind of composite tool material is suitable for continuously cutting quenched steel No.45, especially intermittently cutting quenched steel.",

keywords = "AlO/TiCN, YO, composite, mechanical properties, rare earths",

author = "Li Xikun and Qiu Guanming and Qiu Tai and Zhao Haitao and Bai Hua and Sun Xudong",

year = "2007",

month = jun,

doi = "10.1016/S1002-0721(07)60519-5",

language = "英语",

volume = "25",

pages = "37--41",

journal = "Journal of Rare Earths",

issn = "1002-0721",

publisher = "Editorial Office of Chinese Rare Earths",

number = "SUPPL. 1",

}

TY - JOUR

T1 - Al2O3/TiCN-0.2% Y2O3 Composite Prepared by HP and Its Cutting Performance

AU - Xikun, Li

AU - Guanming, Qiu

AU - Tai, Qiu

AU - Haitao, Zhao

AU - Hua, Bai

AU - Xudong, Sun

PY - 2007/6

Y1 - 2007/6

N2 - Al2O3/TiCN-0.2% Y2O3 composites were fabricated by hot pressing sintering. The effect on mechanical property and microstructure of the sample composition and HP temperate was investigated. The results of Al2O3/TiCN-0.2% Y2O3 were satisfied. The bending strength, fracture toughness, Vickers hardness was respectively 1015 MPa, 6.89 MPa·m1/2 20.82 MPa at 1650 °C for 20 min. Good wear resistance was found for the kind of ceramic material when used as cutting tools in the machining of the hardened carbon steel. By the compared experiment for the cutting performances, it could be seen that the performance of this composite material was better than that of the ceramic tool material YT15 for continuously cutting quenched steel. This kind of composite tool material is suitable for continuously cutting quenched steel No.45, especially intermittently cutting quenched steel.

AB - Al2O3/TiCN-0.2% Y2O3 composites were fabricated by hot pressing sintering. The effect on mechanical property and microstructure of the sample composition and HP temperate was investigated. The results of Al2O3/TiCN-0.2% Y2O3 were satisfied. The bending strength, fracture toughness, Vickers hardness was respectively 1015 MPa, 6.89 MPa·m1/2 20.82 MPa at 1650 °C for 20 min. Good wear resistance was found for the kind of ceramic material when used as cutting tools in the machining of the hardened carbon steel. By the compared experiment for the cutting performances, it could be seen that the performance of this composite material was better than that of the ceramic tool material YT15 for continuously cutting quenched steel. This kind of composite tool material is suitable for continuously cutting quenched steel No.45, especially intermittently cutting quenched steel.

KW - AlO/TiCN

KW - YO

KW - composite

KW - mechanical properties

KW - rare earths

UR - http://www.scopus.com/inward/record.url?scp=36549065227&partnerID=8YFLogxK

U2 - 10.1016/S1002-0721(07)60519-5

DO - 10.1016/S1002-0721(07)60519-5

M3 - 文章

AN - SCOPUS:36549065227

SN - 1002-0721

VL - 25

SP - 37

EP - 41

JO - Journal of Rare Earths

JF - Journal of Rare Earths

IS - SUPPL. 1

ER -

Al₂O₃/TiCN-0.2% Y₂O₃ Composite Prepared by HP and Its Cutting Performance

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this