Analysis on bursting of rupture disc made by inconel 600 alloy

Jian Qun Tang; Lu Yang Geng; Jian Ming Gong

doi:10.4028/www.scientific.net/KEM.795.290

Analysis on bursting of rupture disc made by inconel 600 alloy

Jian Qun Tang, Lu Yang Geng, Jian Ming Gong

School of Mechanical and Power Engineering

Research output: Contribution to journal › Article › peer-review

5 Scopus citations

Abstract

One conventional domed slotted rupture disc, which was fabricated with Inconel 600 alloy, was used in reaction kettle. It was burst after only 2000 times of operational circles. The burst causes were investigated. Morphologies of the fracture were observed by scanning electron microscope and the relatively chemical compositions were analyzed by energy dispersive spectrometer. Meanwhile, metallographic microstructures were also observed and analyzed for the material of the failure of the rupture disc. The results show that the bursting of the rupture disc was caused by fatigue fracture.

Original language	English
Pages (from-to)	290-295
Number of pages	6
Journal	Key Engineering Materials
Volume	795
DOIs	https://doi.org/10.4028/www.scientific.net/KEM.795.290
State	Published - 2019

Keywords

Burst
Fatigue fracture
Inconel 600 alloy
Rupture disc

Access to Document

10.4028/www.scientific.net/KEM.795.290

Cite this

@article{193699e14b114e5281bfd546125e4336,

title = "Analysis on bursting of rupture disc made by inconel 600 alloy",

abstract = "One conventional domed slotted rupture disc, which was fabricated with Inconel 600 alloy, was used in reaction kettle. It was burst after only 2000 times of operational circles. The burst causes were investigated. Morphologies of the fracture were observed by scanning electron microscope and the relatively chemical compositions were analyzed by energy dispersive spectrometer. Meanwhile, metallographic microstructures were also observed and analyzed for the material of the failure of the rupture disc. The results show that the bursting of the rupture disc was caused by fatigue fracture.",

keywords = "Burst, Fatigue fracture, Inconel 600 alloy, Rupture disc",

author = "Tang, {Jian Qun} and Geng, {Lu Yang} and Gong, {Jian Ming}",

note = "Publisher Copyright: {\textcopyright} 2019 Trans Tech Publications Ltd, Switzerland.",

year = "2019",

doi = "10.4028/www.scientific.net/KEM.795.290",

language = "英语",

volume = "795",

pages = "290--295",

journal = "Key Engineering Materials",

issn = "1013-9826",

publisher = "Trans Tech Publications Ltd",

}

TY - JOUR

T1 - Analysis on bursting of rupture disc made by inconel 600 alloy

AU - Tang, Jian Qun

AU - Geng, Lu Yang

AU - Gong, Jian Ming

PY - 2019

Y1 - 2019

N2 - One conventional domed slotted rupture disc, which was fabricated with Inconel 600 alloy, was used in reaction kettle. It was burst after only 2000 times of operational circles. The burst causes were investigated. Morphologies of the fracture were observed by scanning electron microscope and the relatively chemical compositions were analyzed by energy dispersive spectrometer. Meanwhile, metallographic microstructures were also observed and analyzed for the material of the failure of the rupture disc. The results show that the bursting of the rupture disc was caused by fatigue fracture.

AB - One conventional domed slotted rupture disc, which was fabricated with Inconel 600 alloy, was used in reaction kettle. It was burst after only 2000 times of operational circles. The burst causes were investigated. Morphologies of the fracture were observed by scanning electron microscope and the relatively chemical compositions were analyzed by energy dispersive spectrometer. Meanwhile, metallographic microstructures were also observed and analyzed for the material of the failure of the rupture disc. The results show that the bursting of the rupture disc was caused by fatigue fracture.

KW - Burst

KW - Fatigue fracture

KW - Inconel 600 alloy

KW - Rupture disc

UR - http://www.scopus.com/inward/record.url?scp=85090427044&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/KEM.795.290

DO - 10.4028/www.scientific.net/KEM.795.290

M3 - 文章

AN - SCOPUS:85090427044

SN - 1013-9826

VL - 795

SP - 290

EP - 295

JO - Key Engineering Materials

JF - Key Engineering Materials

ER -

Analysis on bursting of rupture disc made by inconel 600 alloy

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this