TY - JOUR
T1 - Effects of inorganic electrolytes on zeta potentials of ceramic microfiltration membranes
AU - Zhao, Yijiang
AU - Xing, Weihong
AU - Xu, Nanping
AU - Wong, Fook Sin
PY - 2005/3/15
Y1 - 2005/3/15
N2 - The characterization of surface electrical properties of membrane materials is critical for understanding and predicting filtration performances of membranes. In this paper, electrical properties of alumina-based ceramic microfiltration membrane were studied. Zeta potential of the membranes itself is determined using electro-osmosis measurements in the presence of various electrolytes, including NaCl, NH4Cl, CaCl2, FeCl 2, AlCl3, Na2SO4, Na2S, Na3PO4, FeSO4 and Al2(SO 4)3, which are commonly encountered in inorganic salt industry. The zeta potential is obtained over a wide range of pH values (2-12) at ionic strengths of 0.01 M. The zeta potential decreases with increase of ionic strength in the NaCl solution and isoelectric point (IEP) shows little dependence on the ionic strength indicating the absence of a specific adsorption of Cl- and Na+ ions. The shifting of the IEP of the membrane to a higher pH value in FeCl2, CaCl2 and AlCl3 solutions shows specific adsorption of the cations, and specific adsorption of the S2-, SO42-, PO43- ions shifts the IEP to a lower pH value. The zeta potential in FeSO4 and Al 2(SO4)3 solutions were very low, indicating a decrease of charge density on the membrane surface due to the complex co-adsorption of the cations and the anions on the membrane surface.
AB - The characterization of surface electrical properties of membrane materials is critical for understanding and predicting filtration performances of membranes. In this paper, electrical properties of alumina-based ceramic microfiltration membrane were studied. Zeta potential of the membranes itself is determined using electro-osmosis measurements in the presence of various electrolytes, including NaCl, NH4Cl, CaCl2, FeCl 2, AlCl3, Na2SO4, Na2S, Na3PO4, FeSO4 and Al2(SO 4)3, which are commonly encountered in inorganic salt industry. The zeta potential is obtained over a wide range of pH values (2-12) at ionic strengths of 0.01 M. The zeta potential decreases with increase of ionic strength in the NaCl solution and isoelectric point (IEP) shows little dependence on the ionic strength indicating the absence of a specific adsorption of Cl- and Na+ ions. The shifting of the IEP of the membrane to a higher pH value in FeCl2, CaCl2 and AlCl3 solutions shows specific adsorption of the cations, and specific adsorption of the S2-, SO42-, PO43- ions shifts the IEP to a lower pH value. The zeta potential in FeSO4 and Al 2(SO4)3 solutions were very low, indicating a decrease of charge density on the membrane surface due to the complex co-adsorption of the cations and the anions on the membrane surface.
KW - Ceramic membrane
KW - Electro-osmosis
KW - Inorganic electrolyte
KW - Zeta potential
UR - http://www.scopus.com/inward/record.url?scp=13844280294&partnerID=8YFLogxK
U2 - 10.1016/j.seppur.2004.06.011
DO - 10.1016/j.seppur.2004.06.011
M3 - 文章
AN - SCOPUS:13844280294
SN - 1383-5866
VL - 42
SP - 117
EP - 121
JO - Separation and Purification Technology
JF - Separation and Purification Technology
IS - 2
ER -