Experimental and constitutive modelling studies of type 316L stainless steel based on internal stress under low cycle fatigue and creep-fatigue interaction

Low cycle fatigue (LCF) and creep-fatigue interaction (CFI) behaviour of 316L stainless steel at 550 °C were investigated using experimental and modelling approaches. Results demonstrate that friction and back stress contribute to the initial hardening stage, whereas the former is primarily responsible for the subsequent softening stage. Besides, friction stress also accounts for the non-masing feature and varied softening rate. Increasing holding time induces a rise followed by a decline in friction stress, while the back stress decreases steadily to a saturated value. Moreover, a short tensile holding duration leads to planar structures and higher dislocation density. However, a longer tensile holding time promotes dislocation annihilation and subgrains growth, and elongates dislocation cells. Finally, an improved viscoplastic constitutive model was proposed based on the internal stress analysis. The kinematic hardening rule was improved by considering the cycle-dependent plastic modulus and stress relaxation, and the non-masing and variable softening rate were captured by modifying the isotropic hardening rule. In addition, holding time-related factors were also coupled into the model. The proposed model is robust for describing the cyclic features under both LCF and CFI.