Incorporation of cadmium into clinker during the co-processing of waste with cement kiln

Lei Wang, Rundong Li, Yanlong Li, Lihong Wei

Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

2 Scopus citations

Abstract

The incorporation of cadmium into clinker during the co-processing of waste with cement kiln was investigated. Cadmium contained reagent was added to the cement raw meal to produce clinkers after clinkerization process. XRD analysis and SEM-EDS analysis were employed to indentify the major mineral phase of clinker and the cadmium contained mineral phase. Leaching test, sequential extraction procedures were employed to evaluate the leaching potential of cadmium in clinker. The results show the stabilization rate of cadmium during the clinkerization process is low. The incorporation ratio of cadmium in C 2S is 0.32%∼1.14%, the incorporation ability of cadmium in C 2S is higher than C3S. The major mineral phases of clinker with the incorporation of cadmium were CH, C3S and C2S. The average leaching concentration of cadmium of clinker was 1.4 μg/L, which was higher than the blank samples. BCR Sequential extraction procedures analysis of the clinkers show exchangeable, water and acid-soluble fraction and residual fraction were very small, while the reducible phase of cadmium was up to 95.13%.

Original languageEnglish
Title of host publicationRenewable and Sustainable Energy
Pages2160-2164
Number of pages5
DOIs
StatePublished - 2012
Externally publishedYes
Event2011 International Conference on Energy, Environment and Sustainable Development, ICEESD 2011 - Shanghai, China
Duration: 21 Oct 201123 Oct 2011

Publication series

NameAdvanced Materials Research
Volume347-353
ISSN (Print)1022-6680

Conference

Conference2011 International Conference on Energy, Environment and Sustainable Development, ICEESD 2011
Country/TerritoryChina
CityShanghai
Period21/10/1123/10/11

Keywords

  • BCR
  • Cadmium
  • Clinker
  • Co-processing
  • Leaching
  • SEM-EDS

Cite this