The composition and performance of alite-ye'elimite clinker produced at 1300 °C

Yueyang Hu; Weifeng Li; Suhua Ma; Qianqian Wang; Huiru Zou; Xiaodong Shen

doi:10.1016/j.cemconres.2018.02.009

The composition and performance of alite-ye'elimite clinker produced at 1300 °C

Yueyang Hu, Weifeng Li, Suhua Ma, Qianqian Wang, Huiru Zou, Xiaodong Shen

College of Materials Science and Engineering

Nanjing Tech University

Research output: Contribution to journal › Article › peer-review

42 Scopus citations

Abstract

Alite-ye'elimite clinker is a high cementing clinker prepared by introducing calcium sulfoaluminate, a non-silicate mineral, into the cement clinker. The mineral composition and mechanics of tricalcium silicate-rich sulfur aluminate prepared at 1300 °C are reported. The effects of copper slag and phosphorus slag on the phase composition, heat release and compressive strength were investigated. The phase composition was analysed by X-ray powder diffraction. The results show that the copper slag and phosphorus slag can lower the burn temperature of the clinker and promote the coexistence of C₃S and C₄A₃S¯. The quality of clinker produced at 1300 °C is satisfactory. The compressive strength of mortar curing at 28 d is higher than that of P·II 52.5.

Original language	English
Pages (from-to)	41-48
Number of pages	8
Journal	Cement and Concrete Research
Volume	107
DOIs	https://doi.org/10.1016/j.cemconres.2018.02.009
State	Published - May 2018

Keywords

Alite
Calcium sulfoaluminate
Liquid properties

Access to Document

10.1016/j.cemconres.2018.02.009

Cite this

@article{b44c0150ce504ad69fd4768ebe034a93,

title = "The composition and performance of alite-ye'elimite clinker produced at 1300 °C",

abstract = "Alite-ye'elimite clinker is a high cementing clinker prepared by introducing calcium sulfoaluminate, a non-silicate mineral, into the cement clinker. The mineral composition and mechanics of tricalcium silicate-rich sulfur aluminate prepared at 1300 °C are reported. The effects of copper slag and phosphorus slag on the phase composition, heat release and compressive strength were investigated. The phase composition was analysed by X-ray powder diffraction. The results show that the copper slag and phosphorus slag can lower the burn temperature of the clinker and promote the coexistence of C3S and C4A3S¯. The quality of clinker produced at 1300 °C is satisfactory. The compressive strength of mortar curing at 28 d is higher than that of P·II 52.5.",

keywords = "Alite, Calcium sulfoaluminate, Liquid properties",

author = "Yueyang Hu and Weifeng Li and Suhua Ma and Qianqian Wang and Huiru Zou and Xiaodong Shen",

note = "Publisher Copyright: {\textcopyright} 2018 Elsevier Ltd",

year = "2018",

month = may,

doi = "10.1016/j.cemconres.2018.02.009",

language = "英语",

volume = "107",

pages = "41--48",

journal = "Cement and Concrete Research",

issn = "0008-8846",

publisher = "Elsevier Ltd",

}

TY - JOUR

T1 - The composition and performance of alite-ye'elimite clinker produced at 1300 °C

AU - Hu, Yueyang

AU - Li, Weifeng

AU - Ma, Suhua

AU - Wang, Qianqian

AU - Zou, Huiru

AU - Shen, Xiaodong

PY - 2018/5

Y1 - 2018/5

N2 - Alite-ye'elimite clinker is a high cementing clinker prepared by introducing calcium sulfoaluminate, a non-silicate mineral, into the cement clinker. The mineral composition and mechanics of tricalcium silicate-rich sulfur aluminate prepared at 1300 °C are reported. The effects of copper slag and phosphorus slag on the phase composition, heat release and compressive strength were investigated. The phase composition was analysed by X-ray powder diffraction. The results show that the copper slag and phosphorus slag can lower the burn temperature of the clinker and promote the coexistence of C3S and C4A3S¯. The quality of clinker produced at 1300 °C is satisfactory. The compressive strength of mortar curing at 28 d is higher than that of P·II 52.5.

AB - Alite-ye'elimite clinker is a high cementing clinker prepared by introducing calcium sulfoaluminate, a non-silicate mineral, into the cement clinker. The mineral composition and mechanics of tricalcium silicate-rich sulfur aluminate prepared at 1300 °C are reported. The effects of copper slag and phosphorus slag on the phase composition, heat release and compressive strength were investigated. The phase composition was analysed by X-ray powder diffraction. The results show that the copper slag and phosphorus slag can lower the burn temperature of the clinker and promote the coexistence of C3S and C4A3S¯. The quality of clinker produced at 1300 °C is satisfactory. The compressive strength of mortar curing at 28 d is higher than that of P·II 52.5.

KW - Alite

KW - Calcium sulfoaluminate

KW - Liquid properties

UR - http://www.scopus.com/inward/record.url?scp=85042202642&partnerID=8YFLogxK

U2 - 10.1016/j.cemconres.2018.02.009

DO - 10.1016/j.cemconres.2018.02.009

M3 - 文章

AN - SCOPUS:85042202642

SN - 0008-8846

VL - 107

SP - 41

EP - 48

JO - Cement and Concrete Research

JF - Cement and Concrete Research

ER -

The composition and performance of alite-ye'elimite clinker produced at 1300 °C

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this

The composition and performance of alite-ye'elimite clinker produced at 1300 °C

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this

The composition and performance of alite-ye'elimite clinker produced at 1300 °C