Annealing induced discoloration of transparent YAG ceramics using divalent additives in solid-state reaction sintering

Tetraethyl orthosilicate (TEOS) was commonly served as a sintering additive to promote the densification of transparent Y₃Al₅O₁₂ (YAG) ceramics. However, Si⁴⁺ that decomposed from TEOS would restrain the conversion of dopants into a higher valence state (e.g., Cr³⁺ → Cr⁴⁺). In this study, by using divalent sintering additives (CaO and MgO), the colorless and highly transparent YAG ceramics (T = 84.6%, at 1064 nm) were obtained after vacuum sintering at 1840 °C for 8 h and without subsequent annealing in air. An absorption peak centered at ∼320 nm was observed before annealing, and it extended to ∼550 nm after annealing at 1450 °C for 10 h in air. A discoloration phenomenon occurred and more scattering centers were observed with the formation of new [Mg/Ca²⁺F⁺] color centers. Air annealing did not improve the optical quality of the as-fabricated YAG ceramics with divalent dopants as sintering additives, owing to the formation of scattering centers.