Effect of Ti addition on mechanical properties and corrosion resistance of Ni-free Zr-based bulk metallic glasses for potential biomedical applications

Hongqi Shi, Wenbo Zhao, Xinwen Wei, Yi Ding, Xiaodong Shen, Wenjuan Liu

科研成果: 期刊稿件文章同行评审

62 引用 (Scopus)

摘要

Toxic element free-Zr-based bulk metallic glasses (BMGs) have attracted considerable attentions for biomedical applications, in term of their excellent bio-corrosion and mechanical properties. In the present work, we fabricated a series of Zr65-xTixCu20Al10Fe5 (x = 0, 2, 4, 6 and 8) alloys using the injection copper-mold casting method, and reported the significant effect of Ti addition both on mechanical performance and corrosion behavior. It is found the glass forming ability (GFA) and plasticity are significantly improved by increasing Ti content up to 2 at.%, but deteriorated after excess Ti additions. The obtained Zr63Ti2Cu20Al10Fe5 amorphous alloy provides the largest supercooled liquid region width of 73 K, compressive fracture strength of 1905 MPa and plasticity of 8.57%, which are much higher than 67 K, 1854 MPa and 5.43% of the pristine Zr65Cu20Fe5Al10 BMG. However, the electrochemical measurements show that as-prepared Zr63Ti2Cu20Al10Fe5 alloy exhibits a terrible passivation ability and inferior corrosion resistance in phosphate-buffered saline (PBS) solution, which is mainly ascribed to the numerous defects in the passive films. On the contrary, further addition of Ti to 4–6 at.% promotes the intactness of passive film for Zr-based BMGs and enhances their resistance to pitting corrosion, in despite giving rise to unsatisfied mechanical performance.

源语言英语
文章编号152636
期刊Journal of Alloys and Compounds
815
DOI
出版状态已出版 - 30 1月 2020

指纹

探究 'Effect of Ti addition on mechanical properties and corrosion resistance of Ni-free Zr-based bulk metallic glasses for potential biomedical applications' 的科研主题。它们共同构成独一无二的指纹。

引用此