Effects of Cu Coating Addition on Mechanical Properties of Vacuum Brazed Joints

In this study, a copper brazing filler metal coating is fabricated on a 304 stainless steel (304SS) substrate using an electroplating technique. The effect of using electroplated copper brazing filler metal coatings compared to pure copper foil of the same thickness for vacuum brazing of stainless steel joints is investigated. The microstructure and microhardness of the brazed joints are characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), and a Vickers hardness tester. The shear strength of the brazed joints is measured using an INSTRON 5869 universal testing machine. The results indicate that the electroplated Cu coating is dense, predominantly with a single cubic phase, with a few copper particles aggregating on the surface. Under electroplating conditions of 20 mA cm⁻² for 1 h, the coating thickness was 56 μm. The shear strength of the brazed joint with this coating reached a maximum of 333.7 MPa, which is higher than that of a brazed joint with a 60 μm thick copper foil, which exhibits a shear strength of 303.2 MPa. The shear strength of the brazed joints shows an initial increase followed by a decrease as current density and electroplating time increase. This study provides significant technical support for brazing complex shapes or precision components. It suggests a method to simplify the brazing process, reduce production costs, and enhance the strength of brazed joints.