Experimental and numerical study on the validity of the energy-based time equivalent method for evaluating the fire resistance of timber components exposed to travelling fires

An energy-based time equivalent method that is capable of converting the fire resistance design of timber components exposed to the realistic fire to that of the standard fire was proposed. To verify the effectiveness of the method applied to the improved Travelling Fires Methodology (iTFM) fires, a series of iTFM fires and their corresponding equivalent standard fire tests were implemented on six glued laminated timber columns. The effectiveness of the method was fully confirmed by comparing the fire effects, the temperature distribution of the pyrolysis layer, and the remaining load-bearing capacity after fire for the timber columns under the iTFM fires and their equivalent standard fires. Meanwhile, it was well illustrated that the adhesive layer was almost no effect on the fire resistance of the timber columns by comparing the cross-sectional temperature distribution, charring depth and charring rate in two directions of the timber columns. To simplify the application of the energy equivalence method, the thermal properties relationships applied to the finite element heat transfer analysis of timber were modified. The accuracy of the modified thermal property relationships was demonstrated by comparing the surface temperature, charring depth, and charring rate obtained from finite element simulations with those measured by the experiment. The simplified energy equivalence method based on the finite element was not only easy for designers to apply, but also helped to promote the development of performance-based fire protection design for timber structures.