High bandwidth envelope tracking power supply with pulse edge independent distribution method

Switching-linear hybrid envelope tracking (SLH ET) power supplies can achieve both high efficiency and high bandwidth. However, the switching frequency is often required to be far higher than or at least equal to the envelope bandwidth. With the modulation methods advance, the increasing envelope bandwidth may lead to a too high switching frequency to implement. This paper proposes an SLH ET power supply, consisting of a multilevel converter and a linear amplifier connected in series. Based on the multicell configuration of the multilevel converter, a pulse edge independent distribution method is proposed, which can break the control pulses for the multilevel converter into independent rising and falling edges, and rebuild them with new sequences. It can not only reduce the switching frequency to 1/n (n ∊ N) of the envelope bandwidth but also extend the pulsewidths to provide a more reliable and effective driving for high bandwidth applications. A prototype for 2 MHz sine-wave tracking, with 7-27-V output voltage and 90-W peak output power, is fabricated and tested. It is also verified by a 5- A nd a 10-MHz bandwidth communication envelope. The experimental results validate the proposed method.