Preparation and oil-absorption performance of poly(butyl methacrylate- styrene)/attapulgite composites

Xiao Zhong Chu; Shou Yong Zhou; Ai Lian Xue; Kui Wu; Yi Jiang Zhao; Wei Hong Xing

doi:10.3969/j.issn.1003-9015.2015.04.019

Preparation and oil-absorption performance of poly(butyl methacrylate- styrene)/attapulgite composites

Xiao Zhong Chu, Shou Yong Zhou, Ai Lian Xue, Kui Wu, Yi Jiang Zhao, Wei Hong Xing

化工学院

科研成果: 期刊稿件 › 文章 › 同行评审

1 引用（Scopus）

摘要

P(BMA-St)/OATP as an oil-absorption composite was prepared via suspension polymerization using butyl methacrylate (BMA) and styrene (St) as two monomers and modified attapulgite (OATP) as an additive. The effects of dosages of attapulgite, polyvinyl alcohol (PVA) (dispersant), divinylbenzene (DVB) (crosslinker) and azodiisobutyronitrile (AIBN) (initiator), and monomer mass ratio on composite oil absorbency were investigated, and an optimal condition was determined. When the monomer mass ratio is 7:5, and the amounts of OATP, PVA, DVB and AIBN over the total monomer mass are 3%, 3%, 0.5% and 1%, respectively, the toluene absorbency of the prepared composite can reach to 17.8 g·g^-1. Properties such as oil absorbency, oil retention and regenerability of P(BMA-St)/OATP are all better than those of pure P(BMA-St) under same experimental conditions.

源语言	英语
页（从-至）	903-912
页数	10
期刊	Gao Xiao Hua Xue Gong Cheng Xue Bao/Journal of Chemical Engineering of Chinese Universities
卷	29
期	4
DOI	https://doi.org/10.3969/j.issn.1003-9015.2015.04.019
出版状态	已出版 - 1 8月 2015

访问文件

10.3969/j.issn.1003-9015.2015.04.019

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{99e12163fcfc45c3aecb73442b0d8bcc,

title = "Preparation and oil-absorption performance of poly(butyl methacrylate- styrene)/attapulgite composites",

abstract = "P(BMA-St)/OATP as an oil-absorption composite was prepared via suspension polymerization using butyl methacrylate (BMA) and styrene (St) as two monomers and modified attapulgite (OATP) as an additive. The effects of dosages of attapulgite, polyvinyl alcohol (PVA) (dispersant), divinylbenzene (DVB) (crosslinker) and azodiisobutyronitrile (AIBN) (initiator), and monomer mass ratio on composite oil absorbency were investigated, and an optimal condition was determined. When the monomer mass ratio is 7:5, and the amounts of OATP, PVA, DVB and AIBN over the total monomer mass are 3%, 3%, 0.5% and 1%, respectively, the toluene absorbency of the prepared composite can reach to 17.8 g·g-1. Properties such as oil absorbency, oil retention and regenerability of P(BMA-St)/OATP are all better than those of pure P(BMA-St) under same experimental conditions.",

keywords = "Absorption, Attapulgite, Oil-absorptive composites, Polymers, Preparation",

author = "Chu, {Xiao Zhong} and Zhou, {Shou Yong} and Xue, {Ai Lian} and Kui Wu and Zhao, {Yi Jiang} and Xing, {Wei Hong}",

year = "2015",

month = aug,

day = "1",

doi = "10.3969/j.issn.1003-9015.2015.04.019",

language = "英语",

volume = "29",

pages = "903--912",

journal = "Gao Xiao Hua Xue Gong Cheng Xue Bao/Journal of Chemical Engineering of Chinese Universities",

issn = "1003-9015",

publisher = "Zhejiang University",

number = "4",

}

TY - JOUR

T1 - Preparation and oil-absorption performance of poly(butyl methacrylate- styrene)/attapulgite composites

AU - Chu, Xiao Zhong

AU - Zhou, Shou Yong

AU - Xue, Ai Lian

AU - Wu, Kui

AU - Zhao, Yi Jiang

AU - Xing, Wei Hong

PY - 2015/8/1

Y1 - 2015/8/1

N2 - P(BMA-St)/OATP as an oil-absorption composite was prepared via suspension polymerization using butyl methacrylate (BMA) and styrene (St) as two monomers and modified attapulgite (OATP) as an additive. The effects of dosages of attapulgite, polyvinyl alcohol (PVA) (dispersant), divinylbenzene (DVB) (crosslinker) and azodiisobutyronitrile (AIBN) (initiator), and monomer mass ratio on composite oil absorbency were investigated, and an optimal condition was determined. When the monomer mass ratio is 7:5, and the amounts of OATP, PVA, DVB and AIBN over the total monomer mass are 3%, 3%, 0.5% and 1%, respectively, the toluene absorbency of the prepared composite can reach to 17.8 g·g-1. Properties such as oil absorbency, oil retention and regenerability of P(BMA-St)/OATP are all better than those of pure P(BMA-St) under same experimental conditions.

AB - P(BMA-St)/OATP as an oil-absorption composite was prepared via suspension polymerization using butyl methacrylate (BMA) and styrene (St) as two monomers and modified attapulgite (OATP) as an additive. The effects of dosages of attapulgite, polyvinyl alcohol (PVA) (dispersant), divinylbenzene (DVB) (crosslinker) and azodiisobutyronitrile (AIBN) (initiator), and monomer mass ratio on composite oil absorbency were investigated, and an optimal condition was determined. When the monomer mass ratio is 7:5, and the amounts of OATP, PVA, DVB and AIBN over the total monomer mass are 3%, 3%, 0.5% and 1%, respectively, the toluene absorbency of the prepared composite can reach to 17.8 g·g-1. Properties such as oil absorbency, oil retention and regenerability of P(BMA-St)/OATP are all better than those of pure P(BMA-St) under same experimental conditions.

KW - Absorption

KW - Attapulgite

KW - Oil-absorptive composites

KW - Polymers

KW - Preparation

UR - http://www.scopus.com/inward/record.url?scp=84942059204&partnerID=8YFLogxK

U2 - 10.3969/j.issn.1003-9015.2015.04.019

DO - 10.3969/j.issn.1003-9015.2015.04.019

M3 - 文章

AN - SCOPUS:84942059204

SN - 1003-9015

VL - 29

SP - 903

EP - 912

JO - Gao Xiao Hua Xue Gong Cheng Xue Bao/Journal of Chemical Engineering of Chinese Universities

JF - Gao Xiao Hua Xue Gong Cheng Xue Bao/Journal of Chemical Engineering of Chinese Universities

IS - 4

ER -

Preparation and oil-absorption performance of poly(butyl methacrylate- styrene)/attapulgite composites

摘要

访问文件

其它文件与链接

指纹

引用此