Atomic Layer Deposition on Block Copolymer Membranes with Gyroidal Nanopores Toward Periodically Nanostructured Vapor Sensors: Nanotubes versus Nanorods

Research output: Contribution to journalArticlepeer-review

18 Scopus citations

Abstract

3D gyroidal networks of ZnO nanorods or nanotubes are synthesized by replicating block copolymer (BCP) templates with gyroidal nanopores via atomic layer deposition (ALD). The generation of 3D ZnO nanorods or nanotubes depends on the thicknesses of deposited ZnO layers, which can be easily and precisely controlled by adjusting ALD cycles. The as-obtained ZnO nanostructures have porosities as high as 77% for gyroidal nanorods and 86% for gyroidal nanotubes due to their unique interconnected structures and rough surfaces. Both gyroidal ZnO nanostructures are used as vapor sensors to detect ethanol with different concentrations. Gyroidal ZnO nanotubes show higher ethanol sensitivity than nanorods because of the inherently interconnected nanotubes and larger porosity. Gyroidal ZnO nanotubes can also act as formaldehyde sensors with the sensitivity as high as 42 to 50 ppm formaldehyde, which is much higher than previously reported sensors based on ZnO nanorods or nanotubes.

Original languageEnglish
Article number1600017
JournalAdvanced Materials Interfaces
Volume3
Issue number16
DOIs
StatePublished - 19 Aug 2016

Keywords

  • atomic layer deposition
  • block copolymers
  • gas sensors
  • gyroidal ZnO nanostructures
  • template synthesis

Fingerprint

Dive into the research topics of 'Atomic Layer Deposition on Block Copolymer Membranes with Gyroidal Nanopores Toward Periodically Nanostructured Vapor Sensors: Nanotubes versus Nanorods'. Together they form a unique fingerprint.

Cite this