Analysis of the autoignition process under the industrial partial oxidation conditions using detailed kinetic modeling

Yefei Liu, Tiefeng Wang

科研成果: 期刊稿件文章同行评审

4 引用 (Scopus)

摘要

In the noncatalytic partial oxidation process, autoignition of the heated premixed combustible gases is a major source of reactor damage, unstable operation, and even explosion accidents. The knowledge of the autoignition behavior is of great importance to risk assessment and loss prevention in the partial oxidation reactors. The large experimental effort could be reduced if a reliable modeling procedure is available to identify the safe operating conditions. In this work the reliability of the detailed kinetic modeling method was investigated by comparing the simulated results with the experimental data reported in the literatures. It was found that the USC II mechanism gave the best predictions on the ignition delay times for the methane/air mixtures with equivalence ratios of 3.33 and 6.67. This mechanism was used to extrapolate the ignition delay times in the industrial partial oxidation process. The effects of initial temperature and equivalence ratio on ignition delay times were also investigated. The species concentration profiles were analyzed to understand the underlying ignition chemistry. The sensitivity analysis was carried out for the identification of the main reactions affecting the autoignition process.

源语言英语
页(从-至)6009-6016
页数8
期刊Industrial and Engineering Chemistry Research
50
10
DOI
出版状态已出版 - 18 5月 2011
已对外发布

指纹

探究 'Analysis of the autoignition process under the industrial partial oxidation conditions using detailed kinetic modeling' 的科研主题。它们共同构成独一无二的指纹。

引用此