Ultraviolet-initiated synthesis and characterization of anionic polyacrylamide

Jiang Ya Ma; Huai Li Zheng; Wei Lu; Fang Ying Ji; Li Wei Liu; Jun Ren Zhu; Yong Jun Sun

doi:10.3964/j.issn.1000-0593(2012)12-3385-05

Ultraviolet-initiated synthesis and characterization of anionic polyacrylamide

Jiang Ya Ma, Huai Li Zheng, Wei Lu, Fang Ying Ji, Li Wei Liu, Jun Ren Zhu, Yong Jun Sun

Chongqing University

科研成果: 期刊稿件 › 文章 › 同行评审

7 引用（Scopus）

摘要

APAM was prepared under the action of composite initiator and UV irradiation, using acryl amide (AM), 2-acrylamido-2- methyl propane sulfonic acid (AMPS) and acrylic acid(AA) as raw materials. The paper studied the effect of proportion between monomers, monomer ratio, initiator concentration and other factors on intrinsic viscosity of the polymer, and optimized preparation conditions. The chemical structure and thermal stability of APAM were characterized by UV, FTIR, SEM and DTA-TGA respectively. The results showed that the APAM with the intrinsic viscosity 1.6×10³ mL·g^-1 can prepared when the proportion between monomers was 70:10:10, the monomer ratio was 40%, initiator concentration was 0.20%, pH was 9 and the illu mination time was 60 min.

源语言	英语
页（从-至）	3385-3389
页数	5
期刊	Guang Pu Xue Yu Guang Pu Fen Xi/Spectroscopy and Spectral Analysis
卷	32
期	12
DOI	https://doi.org/10.3964/j.issn.1000-0593(2012)12-3385-05
出版状态	已出版 - 12月 2012
已对外发布	是

访问文件

10.3964/j.issn.1000-0593(2012)12-3385-05

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{eb8888e0393d457f9485038caeb9e8a6,

title = "Ultraviolet-initiated synthesis and characterization of anionic polyacrylamide",

abstract = "APAM was prepared under the action of composite initiator and UV irradiation, using acryl amide (AM), 2-acrylamido-2- methyl propane sulfonic acid (AMPS) and acrylic acid(AA) as raw materials. The paper studied the effect of proportion between monomers, monomer ratio, initiator concentration and other factors on intrinsic viscosity of the polymer, and optimized preparation conditions. The chemical structure and thermal stability of APAM were characterized by UV, FTIR, SEM and DTA-TGA respectively. The results showed that the APAM with the intrinsic viscosity 1.6×103 mL·g-1 can prepared when the proportion between monomers was 70:10:10, the monomer ratio was 40%, initiator concentration was 0.20%, pH was 9 and the illu mination time was 60 min.",

keywords = "APAM, Intrinsic viscosity, Spectral analysis, Ultraviolet polymerization",

author = "Ma, {Jiang Ya} and Zheng, {Huai Li} and Wei Lu and Ji, {Fang Ying} and Liu, {Li Wei} and Zhu, {Jun Ren} and Sun, {Yong Jun}",

year = "2012",

month = dec,

doi = "10.3964/j.issn.1000-0593(2012)12-3385-05",

language = "英语",

volume = "32",

pages = "3385--3389",

journal = "Guang Pu Xue Yu Guang Pu Fen Xi/Spectroscopy and Spectral Analysis",

issn = "1000-0593",

publisher = "Science China Press",

number = "12",

}

TY - JOUR

T1 - Ultraviolet-initiated synthesis and characterization of anionic polyacrylamide

AU - Ma, Jiang Ya

AU - Zheng, Huai Li

AU - Lu, Wei

AU - Ji, Fang Ying

AU - Liu, Li Wei

AU - Zhu, Jun Ren

AU - Sun, Yong Jun

PY - 2012/12

Y1 - 2012/12

N2 - APAM was prepared under the action of composite initiator and UV irradiation, using acryl amide (AM), 2-acrylamido-2- methyl propane sulfonic acid (AMPS) and acrylic acid(AA) as raw materials. The paper studied the effect of proportion between monomers, monomer ratio, initiator concentration and other factors on intrinsic viscosity of the polymer, and optimized preparation conditions. The chemical structure and thermal stability of APAM were characterized by UV, FTIR, SEM and DTA-TGA respectively. The results showed that the APAM with the intrinsic viscosity 1.6×103 mL·g-1 can prepared when the proportion between monomers was 70:10:10, the monomer ratio was 40%, initiator concentration was 0.20%, pH was 9 and the illu mination time was 60 min.

AB - APAM was prepared under the action of composite initiator and UV irradiation, using acryl amide (AM), 2-acrylamido-2- methyl propane sulfonic acid (AMPS) and acrylic acid(AA) as raw materials. The paper studied the effect of proportion between monomers, monomer ratio, initiator concentration and other factors on intrinsic viscosity of the polymer, and optimized preparation conditions. The chemical structure and thermal stability of APAM were characterized by UV, FTIR, SEM and DTA-TGA respectively. The results showed that the APAM with the intrinsic viscosity 1.6×103 mL·g-1 can prepared when the proportion between monomers was 70:10:10, the monomer ratio was 40%, initiator concentration was 0.20%, pH was 9 and the illu mination time was 60 min.

KW - APAM

KW - Intrinsic viscosity

KW - Spectral analysis

KW - Ultraviolet polymerization

UR - http://www.scopus.com/inward/record.url?scp=84871099393&partnerID=8YFLogxK

U2 - 10.3964/j.issn.1000-0593(2012)12-3385-05

DO - 10.3964/j.issn.1000-0593(2012)12-3385-05

M3 - 文章

AN - SCOPUS:84871099393

SN - 1000-0593

VL - 32

SP - 3385

EP - 3389

JO - Guang Pu Xue Yu Guang Pu Fen Xi/Spectroscopy and Spectral Analysis

JF - Guang Pu Xue Yu Guang Pu Fen Xi/Spectroscopy and Spectral Analysis

IS - 12

ER -

Ultraviolet-initiated synthesis and characterization of anionic polyacrylamide

摘要

访问文件

其它文件与链接

指纹

引用此