Research output per year
Research output per year
Search results
-
2024
Generalizable features-based method for breech face comparisons
Li, B., Zhang, H., Robin, A. U. Z. & Yu, Q., 8 Dec 2024, Proceedings of International Conference on Image Processing, Machine Learning and Pattern Recognition, IPMLP 2024. Association for Computing Machinery, p. 79-85 7 p. (ACM International Conference Proceeding Series).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Health monitoring and performance degradation prediction of large-size and wide-tooth milling machine blades
Liu, L., Chen, J., Hong, R., Ma, X. & Xu, T., 2024, 15th Global Reliability and Prognostics and Health Management Conference, PHM-Beijing 2024. Wang, H. & Li, S. (eds.). Institute of Electrical and Electronics Engineers Inc., (15th Global Reliability and Prognostics and Health Management Conference, PHM-Beijing 2024).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
2023
AE-LSTM-CNN Model based Tool Wear Monitoring
Bian, Q., Wang, C., Bo, C., Peng, H. & Zhang, M., 2023, Proceedings of 2023 CAA Symposium on Fault Detection, Supervision and Safety for Technical Processes, SAFEPROCESS 2023. Institute of Electrical and Electronics Engineers Inc., (Proceedings of 2023 CAA Symposium on Fault Detection, Supervision and Safety for Technical Processes, SAFEPROCESS 2023).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Detection of Surface Defect on Impeller Blade Images based on Improved Centernet Algorithm
Wang, C., Zhang, M., Zhu, W., Wang, C., Bo, C. & Peng, H., 2023, Proceedings - 2023 China Automation Congress, CAC 2023. Institute of Electrical and Electronics Engineers Inc., p. 2937-2942 6 p. (Proceedings - 2023 China Automation Congress, CAC 2023).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Digital twin based bearing fault simulation modeling strategy and display dynamics
Zhao, C., Zhang, Q., Wang, C. & Peng, H., 2023, 2023 6th International Symposium on Autonomous Systems, ISAS 2023. Institute of Electrical and Electronics Engineers Inc., (2023 6th International Symposium on Autonomous Systems, ISAS 2023).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Improved Residual Network and LSTM Hybrid Model Based Tool Health Monitoring
Bian, Q., Wang, C., Bo, C. & Peng, H., 2023, 2023 5th International Conference on Robotics, Intelligent Control and Artificial Intelligence, RICAI 2023. Institute of Electrical and Electronics Engineers Inc., p. 499-503 5 p. (2023 5th International Conference on Robotics, Intelligent Control and Artificial Intelligence, RICAI 2023).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Improved RetinaNet-Based Defect Detection for Engine Parts
Qi, Z., Zhang, M., Li, J., Bo, C., Wang, C. & Peng, H., 2023, 2023 42nd Chinese Control Conference, CCC 2023. IEEE Computer Society, p. 7717-7722 6 p. (Chinese Control Conference, CCC; vol. 2023-July).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Multi-objective optimization of single-line bus combinational scheduling considering passenger choice
Yuan, H., Liu, R., Zhong, L., Lin, L., Zhang, Y. & Huang, K., 2023, 3rd International Conference on Internet of Things and Smart City, IoTSC 2023. Kong, X. & Falcone, F. (eds.). SPIE, 127080D. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 12708).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Visualization Experiment of Condensation in Expansion and Contraction Microchannels
Liu, W. & Ling, X., 5 Oct 2023, Moving Integrated Product Development to Service Clouds in the Global Economy - Proceedings of the 21st ISPE Inc. International Conference on Concurrent Engineering, CE 2014. Wang, C., Zhang, X., Ren, H. & Lu, Y. (eds.). IOS Press BV, p. 407-413 7 p. (Advances in Transdisciplinary Engineering; vol. 38).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
Open Access -
2022
Deep-learning based method for breech face comparisons
Zhu, J., Hong, R., Robin, A. U. Z. & Zhang, H., 15 Jan 2022, ICMLSC 2022 - Proceedings of the 2022 6th International Conference on Machine Learning and Soft Computing. Association for Computing Machinery, p. 15-19 5 p. (ACM International Conference Proceeding Series).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Research on the Collaborative Optimization of Configuration and Scheduling Strategy of All Renewable Energy Multi-energy Complementary System
Chen, X., Huang, W., Gu, Y. & Chen, H., 2022, Proceedings - 2022 International Conference on Manufacturing, Industrial Automation and Electronics, ICMIAE 2022. Institute of Electrical and Electronics Engineers Inc., p. 100-105 6 p. (Proceedings - 2022 International Conference on Manufacturing, Industrial Automation and Electronics, ICMIAE 2022).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Research on the Parameters of Feature Extraction and Matching Algorithms for Breech Face Comparisons
Zhu, J., Hong, R., Zaman Robin, A. U. & Zhang, H., 2022, 2022 6th International Conference on Robotics, Control and Automation, ICRCA 2022. Institute of Electrical and Electronics Engineers Inc., p. 29-33 5 p. (2022 6th International Conference on Robotics, Control and Automation, ICRCA 2022).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
2021
Densely Connected Fully Convolutional Auto-Encoder Based Slewing Bearing Degradation Trend Prediction Method
Liu, L., Chen, J., Wen, Z., Zhang, D. & Jiao, L., 2021, 2021 Global Reliability and Prognostics and Health Management, PHM-Nanjing 2021. Guo, W. & Li, S. (eds.). Institute of Electrical and Electronics Engineers Inc., (2021 Global Reliability and Prognostics and Health Management, PHM-Nanjing 2021).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Nonstationary signal de-noising method of slow-speed large-size slewing bearing using robust local mean decomposition
Pan, Y., Wang, H., Chen, J. & Hong, R., 2021, International Conference on Intelligent Equipment and Special Robots, ICIESR 2021. Zhang, Q. & You, Z. (eds.). SPIE, 121272K. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 12127).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
2020
Numerical simulation of CaCO3/CaO charging process in a spiral coil reactor
Chen, X., Zhang, D., Ling, X. & Wang, Y., 11 Dec 2020, SOLARPACES 2019: International Conference on Concentrating Solar Power and Chemical Energy Systems. Richter, C. (ed.). American Institute of Physics Inc., 0032043. (AIP Conference Proceedings; vol. 2303).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
Open Access -
2019
Simulation of cyclic deformation behavior of ferritic P92 steel based on unified viscoplastic model
Wang, X., Zhang, W., Gong, J. & Wahab, M. A., 2019, Proceedings of the 7th International Conference on Fracture Fatigue and Wear, FFW 2018. Abdel Wahab, M. (ed.). Pleiades journals, p. 547-557 11 p. (Lecture Notes in Mechanical Engineering).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
2018
A modified microstructure-based creep damage model for considering prior low cycle fatigue damage effects
Zhang, W., Wang, X. & Gong, J., 2018, High-Pressure Technology; ASME Nondestructive Evaluation, Diagnosis and Prognosis Division (NDPD); Rudy Scavuzzo Student Paper Symposium and 26th Annual Student Paper Competition. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 5).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
The effect of specimen thickness on low temperature gaseous carburization of 316L austenitic stainless steel
Jiang, Y., Zhang, P. P. & Gong, J., 2018, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6A-2018).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
2017
An improved continuum damage constitutive model for creep deformation of cast 20Cr32Ni1Nb steel
Guo, X., Gong, J. & Geng, L., 2017, High-Pressure Technology; ASME Nondestructive Evaluation, Diagnosis and Prognosis Division (NDPD); SPC Track for Senate. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 5).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
2016
Experimental and numerical studies of fluid flow confined in microchannel
Wang, Y. & Ling, X., 2016, Micro/Nanofluidics and Lab-on-a-Chip; Nanofluids; Micro/Nanoscale Interfacial Transport Phenomena; Micro/Nanoscale Boiling and Condensation Heat Transfer; Micro/Nanoscale Thermal Radiation; Micro/Nanoscale Energy Devices and Systems. American Society of Mechanical Engineers, V001T01A010. (ASME 2016 5th International Conference on Micro/Nanoscale Heat and Mass Transfer, MNHMT 2016; vol. 1).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Investigation of preparation processes and corrosion resistance of NiCrBSi coatings fabricated by laser-high frequency induction hybrid cladding
Shuhua, L. U., Zhang, J. & Ling, X., 2016, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6A-2016).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Leakage of 316Ti SS pipeline transporting 98% H2SO4 due to CUI and changed microstructure from welding
Jian-Qun, T. & Gong, J., 2016, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6A-2016).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Study on structure lightweight of the vehicle mounted LNG tank
Wang, Y. & Ling, X., 2016, Design and Analysis. American Society of Mechanical Engineers (ASME), V003T03A018. (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 3).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
The effect of carbon diffusion on creep behaviours for a dissimilar joint between P91 and 12Cr1MoV steels
Zhao, Y., Gong, J. & Jiang, Y., 2016, High-Pressure Technology; Rudy Scavuzzo Student Paper Symposium and 24th Annual Student Paper Competition; ASME Nondestructive Evaluation, Diagnosis and Prognosis Division (NDPD); Electric Power Research Institute (EPRI) Creep Fatigue Workshop. American Society of Mechanical Engineers (ASME), V005T09A024. (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 5).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
2015
An initial investigation of the thermal-fluid characterization of a visualized loop thermosyphon
Wang, Y., Zhu, Y., Qian, Y., Chen, H. & Yang, L., 20 May 2015, ICEP-IAAC 2015 - 2015 International Conference on Electronic Packaging and iMAPS All Asia Conference. Institute of Electrical and Electronics Engineers Inc., p. 611-616 6 p. 7111087. (ICEP-IAAC 2015 - 2015 International Conference on Electronic Packaging and iMAPS All Asia Conference).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Low cycle fatigue behavior of original ferritic P92 steelat high temperature: Experiments and simulations
Wang, X., Gong, J., Jiang, Y. & Zhao, Y., 2015, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6A-2015).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Study on gradual change of corrosion behaviors in 13MNNIMOR steel weld joint serviced in EO reactor
Ge, Z., Geng, L., Gong, J., Jiang, Y. & Tang, J., 2015, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6A-2015).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
2014
A novel denoising method based on ensemble empirical mode decomposition principle component analysis
Feng, Y., Huang, X. D., Chen, J. & Hong, R. J., 2014, Mechanical Components and Control Engineering III. Ge, W. (ed.). Trans Tech Publications Ltd, p. 1157-1261 105 p. (Applied Mechanics and Materials; vol. 668-669).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Fatigue performance analysis of hoop-wrapped composite cylinders with pit defects on liner based on element birth and death method
Deng, G., Li, Q., Sun, L., Wang, J. & Ling, X., 2014, Codes and Standards. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 1).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Investigation on the intrinsic plasticity of gradient nano-grained aisi 304 stainless steel treated by ultrasonic impact treatment
Yang, X., Ling, X., Yang, S. & Lu, S., 2014, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6A).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Mechanical properties estimation of materials with different grain sizes by small punch test at elevated temperature
Yang, S., Ling, X., Yang, X. & Lu, S., 2014, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Prediction on initiation of hydrogen-induced delayed cracking in high-strength steel based on cohesive zone modeling
Wang, Y., Gong, J., Geng, L. & Jiang, Y., 2014, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Pyrolysis of hailar lignite: Experiments with a tubular reactor and a continuous screw kiln reactor
Gao, H. J., Zhu, Y. Z., Chen, H. J., Liao, C. H., Du, Y. & Wu, H., 2014, Renewable Energy and Power Technology II. Sun, M. (ed.). Trans Tech Publications Ltd, p. 665-671 7 p. (Applied Mechanics and Materials; vol. 672-674).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
2013
Finite element analysis of welding residual stress of the ultra-thick 13MnNiMoR steel cylinder of a large EO reactor made in China
Wen, Y., Gong, J., Geng, L., Wang, Y. & Tu, S., 2013, ASME 2013 Pressure Vessels and Piping Conference, PVP 2013. (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6 B).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Intelligent control of sintering mixture moisture based on RBF model of permeability
Li, G., Zhang, G. M. & Ling, X., 2013, Industrial Design and Mechanics Power II. p. 686-689 4 p. (Applied Mechanics and Materials; vol. 437).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Optimization of residual stresses induced by multiple laser shock processing
Wei, X., Zhou, J. & Ling, X., 2013, ASME 2013 Pressure Vessels and Piping Conference, PVP 2013. (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6 A).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Structure fatigue life analysis of a 1.5MW smart yaw slewing bearing
Feng, Y., Chen, J., Huang, X. D. & Wang, W., 2013, Materials, Transportation and Environmental Engineering. p. 664-670 7 p. (Advanced Materials Research; vol. 779).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
2012
Aging of the gasket materials in simulated PEM environment and accelerated mediums
Li, G., Tan, J. & Gong, J., 2012, Latest Development of Applied Materials Technology. p. 1-9 9 p. (Advanced Materials Research; vol. 509).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Evaluation of residual stresses in butt-welded joints by residual magnetic field measurements
Liang, B., Gong, J., Wang, H. & Ye, C., 2012, Advanced Materials and Process Technology. p. 2427-2434 8 p. (Applied Mechanics and Materials; vol. 217-219).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Experimental of new thermal storage in a desalination system
Xu, S., Ling, X. & Peng, H., 2012, Electrical Information and Mechatronics and Applications. p. 531-535 5 p. (Applied Mechanics and Materials; vol. 143-144).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Modeling of carburization and thermal stress analysis for ethylene cracking furnace tube
Geng, L., Gong, J., Qin, X. & Shen, L., 2012, Physical and Numerical Simulation of Material Processing VI. Niu, J., Niu, J., Zhou, G. & Zhou, G. (eds.). Trans Tech Publications Ltd, p. 1136-1140 5 p. (Materials Science Forum; vol. 704-705).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Research on corrosion behaviors of 13MnNiMoR steel weld joint in EO reactor service environment
Geng, L., Gong, J., Wang, Q., Jiang, Y. & Tang, J., 2012, Latest Development of Applied Materials Technology. p. 156-160 5 p. (Advanced Materials Research; vol. 509).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Studies on CUI of carbon steel in simulation environment containing chloride and sulfur at 80°C
Tang, J., Gong, J. & Jian, Y., 2012, Latest Development of Applied Materials Technology. p. 166-170 5 p. (Advanced Materials Research; vol. 509).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
The simulation of co2 recovery & liquefaction flowsheet in the beer fermentation process by aspen plus software
Yu, K. Z., Tang, J. X. & Ling, X., 2012, Advanced Materials Design and Mechanics. p. 286-289 4 p. (Advanced Materials Research; vol. 569).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
2011
Adsorption and refrigeration performance of ammonia-composite adsorbent working pair
Wan, Y., Zheng, K., Sheng, L., Cui, Q., Chen, H., Wang, H. & Yao, H., 2011, Proceedings - 3rd International Conference on Measuring Technology and Mechatronics Automation, ICMTMA 2011. p. 343-346 4 p. 5720790. (Proceedings - 3rd International Conference on Measuring Technology and Mechatronics Automation, ICMTMA 2011; vol. 1).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
An environment friendly energy recovery technology: Municipal solid waste gasification
Ma, L., Liao, C., Zhu, Y., Chen, H. & Ding, Y., 2011, Proceedings - 3rd International Conference on Measuring Technology and Mechatronics Automation, ICMTMA 2011. p. 407-409 3 p. 5720806. (Proceedings - 3rd International Conference on Measuring Technology and Mechatronics Automation, ICMTMA 2011; vol. 1).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Chemical degradation of the silicone rubber in simulated PEMFC environments
Li, G., Tan, J. Z. & Gong, J. M., 2011, New and Advanced Materials. p. 741-748 8 p. (Advanced Materials Research; vol. 197-198).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Effect of carbon migration on sulfide stress corrosion cracking behavior of dissimilar joints in wet H2S environment
Jiang, Y., Gong, J., Yu, Z. & Rong, D., 2011, Engineering Materials V. Trans Tech Publications Ltd, p. 34-39 6 p. (Key Engineering Materials; vol. 479).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Effect of pre-deformation and ageing on compressive behavior of Ti-58.25wt%Ni alloys at room temperature
Zhu, S. C., Lu, X. F. & Gong, J. M., 2011, New and Advanced Materials. p. 375-382 8 p. (Advanced Materials Research; vol. 197-198).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
-
Errosion-corrosion critical performance of surface nanocrystalline 20 carbon steel in condensate water
Zhu, X. L., Lu, X. F. & Ling, X., 2011, Manufacturing Process Technology. p. 958-964 7 p. (Advanced Materials Research; vol. 189-193).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review