Research output per year
Research output per year
Search results
-
2024
Reliability analysis of overload static pressure turntable based on fuzzy fault tree
Li, Z., Chen, J., Zhang, X. & Ran, Y., 2024, In: Journal of Physics: Conference Series. 2862, 1, 012038.Research output: Contribution to journal › Conference article › peer-review
Open Access -
2023
Performance Prediction of a Dual-axis Tracking Solar Trough Collector Based on Artificial Neural Network
Li, J., Xia, T., Wang, R., Chen, H. & Xu, X., 2023, In: Journal of Physics: Conference Series. 2636, 1, 012040.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Vacuum booster control system design and fault self-check strategies
Liu, R., Yuan, H., Lin, L., Liu, C. & Huang, K., 2023, In: Journal of Physics: Conference Series. 2491, 1, 012034.Research output: Contribution to journal › Conference article › peer-review
Open Access -
2019
Effects of effective compression ratio by modifying IVC timing and stroke length in a reactivity-controlled compression ignition engine
Li, J., Ling, X., Zhou, D. & Yang, W., 2019, In: Energy Procedia. 158, p. 1491-1496 6 p.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Experimental investigation and optimization of total energy consumption in humidification-dehumidification system
Huang, X., Ke, T., Li, Y. & Ling, X., 2019, In: Energy Procedia. 158, p. 3488-3493 6 p.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Experimental investigation on particles characteristics in molten aluminum ligament granulation for waste energy recovery
Shan, X., Peng, H., Ling, X. & Li, J., 2019, In: Energy Procedia. 158, p. 4459-4464 6 p.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Modeling and Simulation Study of Intake System Characteristics of Wankel Engine for UAV
Xiaqing, L. I. U., Minxiang, W. E. I. & Rui, L. I. U., 28 Nov 2019, In: IOP Conference Series: Materials Science and Engineering. 692, 1, 012045.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Parameter analysis of discharging process for CaCO3/CaO thermochemical energy storage
Chen, X., Zhao, N., Ling, X. & Wang, Y., 2019, In: Energy Procedia. 158, p. 4617-4622 6 p.Research output: Contribution to journal › Conference article › peer-review
Open Access -
2017
CFD Simulation of an Intermediate Temperature, Two-phase Loop Thermosiphon for Use as a Linear Focus Solar Receiver
Wang, Y., Wang, X., Chen, H., Fan, H., Taylor, R. A. & Zhu, Y., 2017, In: Energy Procedia. 105, p. 230-236 7 p.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Experimental Investigation of Slag Particles of Ligament Mode Disintegration in Spinning Disk Atomizing
Wang, N., Peng, H., Ling, X., Kang, J. & Xu, M., 2017, In: Energy Procedia. 105, p. 622-627 6 p.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Experimental Investigation of Whole Tires and Biomass Mixed Firing in Reverse Burning Fixed-bed Gasifier
Wu, K., Ren, T., Chen, H. & Zhu, Y., 2017, In: Energy Procedia. 105, p. 583-589 7 p.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Experimental Performance of Tar Removal by a Quench Coupled with Adsorption Technology
Chen, Z., Chen, H., Zhu, Y., Cui, Q., Wan, L. & Cheng, R., 2017, In: Energy Procedia. 105, p. 576-582 7 p.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Pilot Test of Co-pyrolysis Characteristics of Wet Sewage Sludge and Sawdust in an External Heating Moving Bed
Zhu, J., Wan, L., Chen, H., Zhu, Y. & Yang, L., 2017, In: Energy Procedia. 105, p. 570-575 6 p.Research output: Contribution to journal › Conference article › peer-review
Open Access -
2015
Creep Life Prediction for P91/12Cr1MoV Dissimilar Joint Based on the Omega Method
Chen, H., Zhu, G. R. & Gong, J. M., 2015, In: Procedia Engineering. 130, p. 1143-1147 5 p.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Effect of Repair Welding on the Creep Behavior of a 12Cr1MoV/GTR-2CM/P91 Dissimilar Joint
Zhao, Y. P., Gong, J. M., Jiang, Y., Li, Q. N. & Wang, X. W., 2015, In: Procedia Engineering. 130, p. 509-516 8 p.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Effect of Strain Induced α′ Martensite on Concentration of Hydrogen Around a Crack Tip in Austenitic Stainless Steels: FE Simulation
Wang, Y. F., Dou, D. Y., Gong, J. M., Shen, L. M., Li, X. F. & Jiang, W. C., 2015, In: Procedia Engineering. 130, p. 746-753 8 p.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Investigate on the Properties of X80 Pipeline Steel Damaged by High Temperature
Lu, S. H., Ling, X. & Zhang, J. C., 2015, In: Procedia Engineering. 130, p. 609-616 8 p.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Numerical Study and Optimization of Mirror Gap Effect on Wind Load on Parabolic Trough Solar Collectors
Zhang, L., Yang, M. C., Zhu, Y. Z. & Chen, H. J., 1 May 2015, In: Energy Procedia. 69, p. 233-241 9 p.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Redistribution of Residual Stress Field in the Weld Joint Due to Laser Shock Processing
Wei, X. L. & Ling, X., 2015, In: Procedia Engineering. 130, p. 948-955 8 p.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Simulation on a Novel Solar High-temperature Thermochemical Coupled Phase-change Reactor
Ma, T. T., Zhu, Y. Z., Chen, H. J., Ma, Y. & Yang, L., 1 May 2015, In: Energy Procedia. 69, p. 471-480 10 p.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Thermodynamic Simulation of Low Temperature Colossal Carburization of Austenitic Stainless Steel
Rong, D. S., Gong, J. M. & Jiang, Y., 2015, In: Procedia Engineering. 130, p. 676-684 9 p.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Yield Strength Analysis by Small Punch Test Using Inverse Finite Element Method
Yang, S. S., Ling, X., Qian, Y. & Ma, R. B., 2015, In: Procedia Engineering. 130, p. 1039-1045 7 p.Research output: Contribution to journal › Conference article › peer-review
Open Access -
2014
Ligament mode disintegration of liquid film at the rotary disk rim in waste heat recovery process of molten slag
Wang, D., Peng, H. & Ling, X., 2014, In: Energy Procedia. 61, p. 1824-1829 6 p.Research output: Contribution to journal › Conference article › peer-review
Open Access -
2011
Studies on hydrogen permeation of weldments for two low-alloyed steels with different microstructures
Tang, J. Q. & Gong, J. M., 2011, In: American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP. 6, PARTS A AND B, p. 835-839 5 p.Research output: Contribution to journal › Conference article › peer-review
-
2008
Investigation of the influence of shot peening on stress corrosion cracking of stainless steel welded joints
Ling, X., Ni, H. & Gang, M., 2008, In: Materials Science Forum. 575-578 PART 1, p. 672-677 6 p.Research output: Contribution to journal › Conference article › peer-review
-
Numerical simulation of residual stress in the glass-to-metal diffusion seals
Xu, D. & Ling, X., 2008, In: Materials Science Forum. 575-578 PART 1, p. 666-671 6 p.Research output: Contribution to journal › Conference article › peer-review
-
2007
Evaluation of stress corrosion cracking of type 304L stainless steel in low concentration sodium hydroxide solution with high temperature
Zhou, R., Gong, J., Li, F. & Tu, S., 2007, In: Key Engineering Materials. 353-358, PART 4, p. 3031-3034 4 p.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Finite element study of factor effects on residual stresses and thermal deformation of brazed plate-fin structure
Chen, H., Gong, J. M., Tu, S. T. & Geng, L. Y., 2007, In: Key Engineering Materials. 353-358, PART 1, p. 473-476 4 p.Research output: Contribution to journal › Conference article › peer-review
-
Influence of oxidation to small punch creep test
Shan, J., Qian, Z. & Ling, X., 2007, In: Key Engineering Materials. 353-358, PART 1, p. 461-464 4 p.Research output: Contribution to journal › Conference article › peer-review
-
Microstructure reconstruction and numerical simulation of deformation in particle-reinforced composites
Cai, W. Z., Tu, S. T., Zheng, Y. Y. & Gong, J. M., 2007, In: Key Engineering Materials. 353-358, PART 1, p. 567-570 4 p.Research output: Contribution to journal › Conference article › peer-review
-
Prevention of stress corrosion cracking in welded joint of type 304 stainless steel by laser peening
Peng, W. & Ling, X., 2007, In: Key Engineering Materials. 353-358, PART 3, p. 1704-1707 4 p.Research output: Contribution to journal › Conference article › peer-review
-
Pure bending testing of Cr-Mo alloy in metal dusting condition
Xu, T., Tu, S. T., Song, H. J. & Gong, J. M., 2007, In: Key Engineering Materials. 353-358, PART 1, p. 341-344 4 p.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Study on the electrochemical behavior of the weldment for SPV50Q steel in H2S-containing environment
Tang, J. Q., Gong, J. M., Tu, S. T. & Jiang, Y., 2007, In: Key Engineering Materials. 353-358, PART 4, p. 3026-3030 5 p.Research output: Contribution to journal › Conference article › peer-review
-
2002
Cyclic superelastic deformation of TiNi shape-memory alloy
Gong, J. M., Tobushi, H., Takata, K., Okumura, K. & Endo, M., 2002, In: Materials Science Forum. 394-395, p. 245-248 4 p.Research output: Contribution to journal › Conference article › peer-review
-
2000
Research of welding effect on creep damage of high temperature furnace tubes
Gong, J. M., Tu, S. T. & Ling, X., 2000, In: Key Engineering Materials. 171-174, p. 189-196 8 p.Research output: Contribution to journal › Conference article › peer-review
9 Scopus citations -
The influence of material mismatch of weld on the evaluation of time-dependent fracture mechanics parameters
Tu, S. T., Yoon, K. B. & Gong, J. M., 2000, In: Key Engineering Materials. 171-174, p. 51-60 10 p.Research output: Contribution to journal › Conference article › peer-review
3 Scopus citations